Search: half-cab

1966 Willys Jeep CJ-6 Project $5,000 Clinton, IL

Decent number of CJ-6 popping up, this will require a trailer.

Information from seller:

Looking to sell my 66 CJ6. For the Jeep ran and drove down the road before I tore it down. Has the Dauntless V6 in which ran great.This is a project it is down to the frame. Frame has been sandblasted and painted with Eastwood rust prevention paint. New two and a half inch BDS lift kit with shocks springs steering stabilizer. I have tons of new parts to go with fenders, floor pan, radiator, gas tank, complete engine gasket kit, new wire harness, Yukon gear sets with limited slip rear 373 gear. Have original 27 front Axle and a Dana 30 with disc brakes has already had the gear set put in. Cab from CJ5 with doors half cab with doors extra set of doors also included is a 67 Jeep commando with V6 and drivetrain and body but very rough. I'm sure I'm missing some things everything was taken apart put in bags and labeled. The CJ6 has title, no title with commando. Located Clinton Illinois 61727 $5000 no trades

https://www.facebook.com/share/15Fsj6q2pZG/

The seller has three jeeps for sale at different prices.

https://www.facebook.com/marketplace/item/225162892697083

"I have three jeeps for sale. Shoot me an offer on one or all will not part out.

1) 1948 cj2a willys jeep for $2000: it is the black one with the top and no doors, (i do have the doors to go with it). it has a 2.3l ford 4 cylinder in it and the original 3 speed and original transfer. does not run, needs to be wired. new gauges, body in fair shape. Firewall is cut up from previous owner, body is rhino lined. winch not included $2,000 obo.

2) 1965 CJ-5 Tux Park IV $2000: does run needs a carb tune, original v6, 3 speed, and transfer. $2000 obo

3) 1955 CJ-5 $500: Not running pretty much a rolling chassis. the engine pictured is the original 4 cyl for that jeep, unknown condition. there are a pile of parts in the back for it, it also comes with a soft half cab with no doors or frame. no hood or grill 500 obo

Includes a Meyer half cab.

"*Jeep rebuilt in 2015, body off frame, frame and body sandblasted then primed and painted, runs good, currently registered in Rhode Island (no titles in RI for vehicles this old, BUT I can provide copy of current RI reg and bill of sale) driven weekly, NEVER driven in snow/salt or on beach since rebuild, always stored in garage

*4 cylinder F-head, 12 volt, electronic ignition, heater (not original), new head gasket/head shaved, in 2016, new canvas front seat covers/cushions Beachwood Canvas

*jeep has an early civilian CJ5 cowl/hood, fuel tank & carb, homemade rear seat (just being honest), Dual-Matic lockout hubs.

*black steel 1/2 cab with steel doors in good shape, windows work, and comes with new top bows and bow hardware for a canvas top.

*5000 lb winch, on 2" tube, wired for, and mounts front or rear, and the rear has a fabricated 2" bolt on receiver (and will come with pintle hitch mount), front bumper also has 2" receiver.

*miscellaneous extras come with jeep too"

https://hartford.craigslist.org/cto/d/willys-m38a1-military-jeep/6312819185.html

UPDATE:  Still available.  More Pics.

(9/14/09) Three 'small bugs' with this, according to the seller.

"This Jeep is ready to tear it up and built to take it. It started as a full body restoration project. Powered by a Buick V-6. Chevy sm420 4 speed tranny with hydraulic clutch. Dana 20 tranfer case, 1983 Toyota diffs. Front has disc brakes and all new bearings, seals, gaskets, 529 gears, ARB air locker with high steer kit. Rear has spool and 529 as well. Full roll cage. Chevy power steering and gear box. Warn 8274 standup winch. Half cab top with rear window. All sitting on a set of 38.5 super swamper boggers with a matching spare. The tires have 95% tread and are grooved and siped for max traction. Rancho rs 5000 shocks. The body is solid and has no rust. All new fuel and brake lines. There are 3 small bugs. The exhaust neads some tlc.The fuel tank and steering gear box each have a small leak. I have a spare gear box and lots of other parts. I also have a complete extra motor that has 300 miles with a bad rod bearing. SERIOUS INQUIRIES ONLY PLEASE. 360-870-4116"

http://seattle.craigslist.org/oly/cto/1648696760.html

UPDATE: Was on eBay. **SOLD** Might have been used in the movie Prince Avalanche.

The seller just bought this, but now wants to sell it. No indication as to why.  I've never seen one with a top like this (but I don't' follow them too closely).

"This is a great deal. I purchased this jeep 2 months ago for $6000, but now I need to get rid of it.

Runs really well.

THIS IS A VIETNAM ERA JEEP WITH AN AFTERMARKET BODY AND ALL M151A-2 RUNNING GEAR AND POWER PACK.

THE ACTUAL YEAR IS UNKNOWN, PROBABLY IN THE 70'S, AND IT IS TITLED AS A 1993 WHICH IS PROBABLY THE YEAR THE BODY WAS MANUFACTURED.

PAINT IS PRESENTABLE BUT CLEAR COAT IS PEELING IN PLACES, SOME SCRATCHES, AND NO MAJOR RUST.

THIS BODY IS QUITE TRUE TO THE ORIGINAL AND MUCH HEAVIER GAUGE STEEL.

ORIGINAL FUEL TANK IS OUT OF VEHICLE AND WILL NEED TREATMENT FOR RUST REMOVABLE AND INSPECTION FOR ANY LEAKS - IN THE MEANTIME A NEW 7.5 GALLON MARINE POLY TANK IS BEING USED. NEW TIRES, NEW SEATS, NEW BATTERIES (ORIGINAL 24 VOLT SYSTEM),REMOVABLE HALF CAB WITH PLEXIGLASS WINDOWS (ORIGINAL FOLD DOWN GLASS WINDSHIELD), NEW REAR UJOINTS, 4 SPEED TRANNY WITH SHIFT ON THE FLY FRONT TRANSFER FOR 4 WHEEL DRIVE"

UPDATE: The new owner has installed some new wiring, but it has not been completed.

(10/31/2021) This unusual build has dropped in price to $8999.

https://www.facebook.com/marketplace/item/229330496937146

"1947 Willys Jeep CJ2A. Has half cab installed with seat belts. Early model dauntless v6 engine that runs good, stock 1947 transmission/transfer case/axles. Has PTO and PTO driven winch on front. I got rid of the old wiring and have a 12 circuit harness that I started to install that has a new headlight swtch, turn signal switch, new wiper switch, and a new ignition switch. The lights are 12 volt. I also have a relay panel and switch panel for it. The wiring is routed, but not completed. Due to double knee replacements, I am unable to crawl around the Jeep like I used to. This is a really solid Willys Jeep that would make a great hunting rig or trail rider. I did drive it on the street but 30mph is as fast as these jeeps will go. I am asking $5000 or trade for square body suburban 4x4. "

These are some older pics.

UPDATE: **SOLD** Were $900.

"( 2) 1946 Willy's Jeeps CJ-2A one is a military version with a 3 speed on the floor and a rear Power take off .it has a half cab with doors .
The other one is a civlian model with a 3 speed on the colunm (very rare only 4000 made) These are the REAL Jeeps The jeeps that started it all.
They were first used in WW 2 & Korea,
Also these are the Jeeps that you see on the T.V. show M.A.S.H.
These are the Jeeps that the old Veterans drive in the parades.
I Will only sell them as apair with all the extra parts(that the scrapers didn't take yet) and you have to come to my yard to see them I'm looking for $900.00 Or Best Offer Bring Cash Please come and buy these 2 vehicles I hate to see them go to waste a few things are going to happen soon 1) the scrapers are nipping away at them, or 2)I'm going to get pissed off and scrap them my self.
There are not that many of these left and 2 more gone will be a shame (do we have a telethon or a awareness walk to save them!) "

1943 Jeep Willys GPW $5,000 Grand Junction, CO

Andy’s Picks

https://www.facebook.com/marketplace/item/1631405850880672/?ref=saved&referral_code=null

GPW

Information from seller:

1943 Willys MB GPW! This is a legit WWII GPW, it's a project as the engine is currently seized and needs to be replaced. (Facebook doesn't have an option for Willys)

It has a F-Head engine swapped in from a newer Jeep, but its locked up tight. The drivetrain is stock, otherwise.

It has a custom half-cab from a '31-32 Ford pickup, custom hard doors, a bench seat and hood bump to clear the carburetor on the F-Head. The body is in pretty decent condition, despite looking pretty poor. There is some rust in the floor out back.

Comes with a near new GM 181 4 cyl industrial engine, it's a torque monster and would fit with a factory hood. Along with the 181, I have a GM SM465 manual transmission. It would be a more modern, powerful engine with a deeper geared, beefy transmission. Great combo for a Willys!

I'm reluctant to let this one go, you don't find GPW's very often anymore. I do have a title for it, no trades, price is firm. Located in Grand Junction on the Redlands.

The seller has a lot of money into this, but the jeep remains in pieces. The pic below was taken prior to it being disassembled.

https://www.facebook.com/marketplace/item/244281111765795/

"Hello, I have a 1952 Willys CJ3A project for sale. I have had it for about 25 years now and don’t see myself finishing it anytime soon. So it’s time for it to move on. I have about $12k into it and it’s still in pieces. I bought the replacement panels and $4k in parts (see lists in photos). I also had engine completely gone through, machined, and professionally rebuilt ($3k) with hardened vavle seat so it is good for todays gas. It has a Dana 44 rear axle, original heater, professionally rebuilt front and rear driveshafts, and quite a few spare parts including a spare transmission and transfer case. I also have a full steel hard top (no side doors) and a half cab/doors. Have clean title too. I also attached a couple photos of when it was together. I would like to get $6k because there is $4k in parts on the lists alone, $3k in the engine, plus everything else. Open to offers/trades especially a for 55’-59’ Chevy/GMC truck driver/solid project. Goose neck livestock trailer w/lvg qrtrs."

Has an f-head and some body damage, but runs and drives.

"1952 Willys Jeep M38 (Air Force Jeep)
Has f-head conversion, F-head motor came out of a Marine Corp M38A1
Had a 24v system and I converted it to 12v
Kaiser Willys High torque 12v starter
New battery
3 speed manual with high and low range
lockout hubs
Western plow
Half cab
Roll bar
This jeep has never failed me, always started no matter how cold it is, I am currently still using it.
Body and frame are in good shape, not rusty.
Rear passenger side rim is bent, didnt know it was til I mounted these tires on it.
Comes with 3 extra rims and some other spare parts
Have clean title in hand, currently registered

Cab and plow are easy to take off in the spring, and hit the trails. last couple pictures show the cab off and different rims, I switched back to the original style.
$3700 obo tire chains not included
If you are looking at restoration, the rear passenger side of the back corner was damaged and patched at some point, and both sides where the tub meets the bottom of the fender have been patched.'

https://up.craigslist.org/cto/6004987096.html