David EilersMay 20, 2015

1949 CJ-3A Sikeston, MO SOLD

UPDATE: **SOLD** Was $875.

(01/23/2015) Parts jeep.

"I am selling this jeep for parts only, it can be used for parts, off road or on the farm. The sheet metal is has a lot of rust. The drive train is all there and the engine turns over but I have not had it started. It has no title. It does have a lot of good parts."

8 Comments

Idaho ToddMarch 14, 2015 at 2:33 PM
This fella is proud to be a dentist, cool.
Joe in MesaMarch 14, 2015 at 3:54 PM
He wrote that DDS on a Missouri (misery?) license plate. Maybe he'll sell it at 2:30 (tooth hurty?) ;-)
Mark S.March 14, 2015 at 5:37 PM
I have never seen a jeep fender rust there before, I guess the brace was packed full of mud.
Alaska PaulMarch 15, 2015 at 1:06 AM
I think the body brace on the right rear corner is reinforced with wood. The wood absorbs water over the years and rusts thru the body from the inner surface.
deilersMarch 15, 2015 at 5:04 AM
Paul is correct. That's how that area rusts.
Minnesota ChrisMarch 15, 2015 at 1:14 PM
The hats on the fender has blown through too. That seems to be the biggest problems on these jeeps... wood in all the hat channels
Mark S.March 15, 2015 at 2:33 PM
I meant the left front fender ( rears are really quarter panels, not fenders ). I don't recall if the fender brace has wood in it or not.
Minnesota ChrisMarch 16, 2015 at 2:33 PM
Like the hats under the tub, there is wood in the fender hat channel. They acted as stiffeners so they didn't get crushed being bolted to frame