Biscuit Progress - Bump and Steer

For the last few days I've been in Seattle taking advantage of the nice weather to get some work done on Biscuit. Fortunately there weren't too many 'sonny-do' projects, so I had a chance to get right to work.

First, I tackled the custom bracket I made for the transfer case. You might remember that I installed Dana 18 gears into a Dana 20 (a good way to improve the gearing) and turned the single Dana shifter into a dual shifter. When I built the bracket, I designed it to fit alongside the TH 350. I didn't know it wouldn't fit right against a T-18.

Since the shifter bracket is more functional then beautiful, I reused most of the parts. I simply cut off the old tongs, welded them onto a plate, and welded the plate back onto the bracket.

Next, since the transfer case sits slightly lower than it did before, I created a new side bracket. I made a template out of aluminum. To build the bracket I took a piece of an angle I had around the garage, cut it, and bent it into the shape of the template. Again, it's nothing pretty, but gets the job done.

As I explained in a post a couple weeks ago, while I was puling apart my jeep I discovered that the powersteering was rotating slightly as I spun the steering wheel. That's a problem! So, I dedicated the last few days to fixing that problem and changing the way the front bumper connects.

The basic problem was that the stock power steering mount unit only used three of the four holes to attach the steering unit. Therefore, I planned to add a cross piece to provide a place for a fourth bolt to attach. However, that meant I had to cut the plate on top so the bolt could be attached and removed. And, since I was doing that, I figured I would change the way the bumper attached.

Next off came the bumper:

With those projects out of the way I turned my attention to the engine I bought from Daryl last summer. I discovered the motor has stock bores. The pistons appeared cleaned, but never run. The engine looks like it was rebuilt, but never run. The spark plug ends are clean and shiny.

Given the engine looks unused, I'm not going to attempt to rebuild it. Instead, I'm going to run it as it is and focus resources on properly rebuilding my other motor (with its new heads and updated cam) later this year. In the meantime, I can run with this motor and focus on getting the other parts I need to get Biscuit running. Since they are both Buick V6s switching out motors at some future date won't take very long.

Lastly, I thought you might enjoy seeing the welder I've been using. Dad tells me he got this Montgomery Ward classic as a hand-me-down from a local jeep builder (Al Carrol) in the late 1960s. It's still works real well.

I hope to return later this month to complete some more work. I will be updating the front brakes to discs. Thanks to R&P for the brake kit! I'm also hoping to have all the parts to install the drive train. Here are a few more parts I'll be adding to the mix:

1. Holley 390 carb (i have a kenne belle intake)
2. Clutch kit & pilot bushing
3. Brake Calipers for the new disc brakes
4. Brake power CJ-7 unit with proportioner
5. Bushings for my new rear emu springs (thanks to Mitch at ARB for helping out with those)
6. Possibly a different set of headers (am waiting to see what I can find online)

So, stay tuned!