Claiming that Sunday was "Tow Hell" day might be a slight exaggeration, but I wouldn't call it a winning day either. Let's recap the last couple days as I've been so busy I haven't had time to photograph some of it.
I finally got the jeep running well on Friday after determining there was an air leak in a short piece of hose (let air in, but did not let gas out). I then timed it by ear and feel, rather than diagnostics, and that seemed to do the trick. On Saturday, I built a tow setup that utilized existing holes in the front bumper. I wanted some thing strong, but didn't want to drill into the bumper.
Once the tow setup was ready, I turned to the exhaust. I'd already had Ann go to a muffler shop to replicate the 1.5", 7' section of tailpipe I needed (thankfully I had an original end section leftover from one of the DJs to use as a template). I combined the tail pipe with a Walker muffler I bought off Amazon and some Oreilly's clamps and assembled the exhaust with relative ease.
I thought we were ready to head for Pasco on Sunday morning.
We spent the first part of Sunday morning cleaning up the garage. It was a bit of a mess! Once that was done, we hooked up Patterson and began slowly towing him. We didn't make it through the first intersection of my parent's quiet neighborhood before I realized that the jeep wasn't tracking around the corner. When I turned slowly right, it began to turn slowly left, forcing me to hit the brakes.
What the hell? I've towed a number of vehicles and never, ever run into this type of trouble.
We carefully tried a couple more corners and each was the same. The jeep began to turn the opposite way. I'd have to hop out and correct Patterson's direction. After a trip around the block, we arrived at my parent's house once more.
I pulled out my googler, but couldn't find anyone having a similar problem. I concluded the drag link/ross box was somehow interfering with the jeep from tracking properly. I did read were "Dr. Verne" (aka Verne Simmons) would remove his drag link to tow it, but my custom radiator made that strategy near impossible without disassembly of multiple items. I was just about ready to remove the drag link when I decided, on a lark, to unscrew the control screw(could be the wrong name for this) on the Ross box. My assumption was that this would loosen the Ross mechanism, freeing the drag link to spin the steering wheel more easily.
Sure enough, that strategy worked!
With that problem solved, at noon we started for Pasco. We drove for about ten minutes. We were on a two lane highway (Highway 18 for you NW folks) when a truck pulling a boat and trailer suddenly honked at us. Not knowing why, we pulled over immediately. He pulled in front of us. He got out and told me that one of our hubcaps had flown off and his truck had driven over it, making a nasty sound. Fortunately, everything checked out on his rig. Our jeep was fine, but we are now short a W hubcap.
Satisfied there was nothing wrong, we drove another ten minutes, hopping on Interstate 90 heading east. We got to the far end of North Bend when I thought it would be good to check out Patterson one more time. I wanted to make sure the hubs weren't hot. It turns out all the hubs were fine, but Patterson's right front drum was hot. The front right brake wasn't releasing properly. HMMMM
I got out some tools and loosened adjusted the brakes, loosening them in the hopes that would relieve the pressure.
Just as I finished, a car pulled up behind us and a man name James Sprague inquired into the jeep, telling me that when he was younger he had a CJ-2A project that he never quite finished. Now, he said, it was time to get another jeep.
I told him that before he bought a jeep, he'd better sign mine. He got a big grin, took the pen, and signed it. This signing-the-jeep thing is gonna be a big hit!
We got back on the highway and drove until the next exit a few miles later. There, I pulled over to hand test the drum again. Damn, still hot!
I loosened one more time, then we went up the pass, pulling over at Snoqualmie Summit. There, I checked the drum again, but it was still too warm. I decided to pull the tire and see if I could pop the drum off (I didn't really think I would be able to do that, but it was worth a shot. No dice.
Ann was hungry, so she found some lunch at the summit, while I kicked back on the grass with Zollie (our dog). That's when a second guy sat down near me and began asking questions about the jeep. Ollie, having no loyalty whatsover, snuggled right up to the stranger.
As we chatted, I came to the conclusion that we should head back to Renton and drop off the jeep, then head to Pasco. Then, I'd return Monday night/Tues AM to redo the brakes. I broke the news to Ann and she was game.
We got Patterson back "home" and headed back to Pasco (we have an event on Monday we need to attend). So, that's it for now. I'm sure there will be more updates to come this week.
My wife's been busy, too. Here's our cake-pan-turned-air-cleaner-turned artwork:
13 Comments
Leave a Reply